4 Ways to Fix Windows 10/11 by Preparing for Automatic Black Screen Repair (2023)

“I was working on my Windows 10/11 laptop and all of a sudden it restarted and automatic repair popped up immediately. Now it seems that the system is stuck in Windows 10/11,Get ready for automatic black screen repairloop and I can't fix it!"

A friend of mine who recently came across Windows Automatic Repair black screen issue asked me. Ideally, this can happen to any Windows 10/11 user who encounters a problem with their system. Instead of fixing the problem, Windows gets stuck in a deadlock and just shows theGet ready for automatic black screen repair🇧🇷 Don't worry, I'll help you fix it.Windows 10/11 Automatic Repair Black ScreenCheck out different ways in this post.

Part 1: Prepare Windows 10/11 Automatic Repair Black Screen - What's the Problem?

Ideally, users may get black screen after automatic repair due to various reasons. In this case, the system becomes unresponsive or fails to boot correctly. Instead it shows a black screen or restarts automatic repair (in a loop). The following reasons can cause WindowsGet ready for automatic black screen repair.

• This mostly happens when the bootloader or essential boot files are missing.
• A damaged Master Boot Record (MBR) can also be a reason.
• Some changes in BIOS settings or missing boot configuration data (BCD) can also cause this issue.
• It can also occur when the hard drive is damaged, missing, or has a loose connection.
• If the drive or Windows firmware is corrupted then this can cause this issue.
• There could also be an issue with your system's display, graphics card, or installed drivers.
• Any other software or driver related issue can also cause Windows 10 to fix black screen.

Part 2: How to fix black screen after preparing automatic repair?

As there can be several reasons why the black screen appears on the screen after preparing automatic repair, I recommend following these suggestions.

Method 1 – Boot into Safe Mode and Fix Windows Black Screen Issues

If there is just a small problem that caused itWindows 10 Automatic Repair Black Screen, you can fix it by safely restarting your system. Ideally, it loads only the essential components and provides an optimized Windows environment for troubleshooting. Learn more ways to boot into safe mode; CashThis article.

Step 1.Go toWindows Recovery Environment(WinRE) by performing the following steps:

Press the power button to turn off the device.

Press the button again to turn it on.

After Windows starts, press Power BuWinREtton again for 10 seconds to shut it down. Then press it again.

After restarting, press and hold the power button for 10 seconds to turn it off, then turn it back on.

As you repeatedly turned your PC on and off, you will be redirected to WinRE.

step 2.Once you get the advanced start screen on your Windows 10 computer, go to Troubleshooting > Advanced Options.

Step 3.Click on the “Startup Settings” feature among all the options given here.

Step 4This lists several tasks you can perform in the boot configuration. Just click the "Restart" button to continue.

Step 5The screen lists various operations you can perform now, including rebooting your system in safe mode. Just press the key that indicates safe mode (in this case "4").

step 6That is! This will restart your system in safe mode. Once you get the below screen, you can make your choice and start Windows in safe mode.

Method 2: Fix MBR and rebuild BCD

Both the master boot record (MBR) and boot configuration data (BCD) are crucial to booting a system. While the MBR follows the system boot sequence, the BCD contains all the important configuration data needed to load the firmware. If any of these components are damaged or not working, it can causeWindows 10 preparing automatic repair, black screenProduction. You can repair MBR and rebuild BCC on Windows 10 system as follows:

Step 1.To repair MBR or rebuild BCD, you need to boot your system in recovery mode. To do this, make sure the Windows recovery disk is connected to your system.

step 2.Now restart your system and press BIOS key (like DEL or F2) to enter BIOS setup. From here you can change the boot order and prioritize attached recovery media.

Step 3.This will load Windows Recovery on the system and provide the following interface. Instead of installing Windows, choose the option to repair your computer.

Step 4Then go to Troubleshooting > Advanced Options and launch the command prompt on the system.

Step 5Once the command prompt launches, let's use the Bootrec.exe tool to fix the issue.Windows 10 Automatic Repair Black Screen🇧🇷 I would recommend running the following commands:

• Bootrec /fixmbr
• Bootrec /fixboot
• Bootrec/ScanOS
• Bootrec /ReconstruirBcd

In addition to repairing the MBR and rebuilding the BCD, there are two other commands I would recommend. One of them repairs the boot sector (fixBoot), while the other checks the firmware for problems (ScanOS). After executing these commands, you can close the command prompt and restart Windows in normal mode.

Method 3: Reinstall the graphics driver

In addition to the firmware, there may be an issue with the graphics drivers installed on your system. For example, the video driver may be outdated or the software may be corrupted, which can cause this.black screen car repairProduction. To fix Windows Automatic Repair black screen caused by driver-related issues, you can follow the steps below.

Step 1.First, start your computer in safe mode (follow the steps in Method 1), go to the Start menu and find Device Manager to launch it. You can also open the Run prompt and enter the command devmgmt.msc to launch Device Manager.

step 2.In the list of installed drivers, expand Display Drivers. Right-click on the installed driver and choose to uninstall it here.

Step 3.After uninstalling the driver, you can download the appropriate driver setup file from your system or processor website.

Step 4Start the installation and follow a simple one-click process to reinstall the video drivers.

Step 5In addition, you can also access Device Manager and update the installed graphics driver. You can also disable it first and enable it later to roll back the display driver.

Method 4 – Rollback Graphics Driver

If you incorrectly updated your graphics driver or if changing your settings caused the problem, consider this option. By doing this, we revert the display driver settings to a previous update to avoid conflicts. All you have to do is open the Device Manager window and double click on the video driver you want to downgrade. Then go to the "Drivers" tab and click on the "Roll Back Driver" button.

In this way, you can revert driver settings to the existing update and fix Windows 10 repair black screen issue. By the way, you can also learn this.Fix black screen after update.

Recover your data when all above methods failed to start your computer

In most cases, you can fix Windows 10 by preparing black screen error automatic repair. However, the computer may still get stuck on the Automatic Repair Preparation screen. In this case, the best option is to reinstall the Windows system. Before that, you need to restore data on the computer. But how to achieve this goal when computer crashes on abnormal screen?

Fortunately, you can count on the help ofRecoverit data recovery🇧🇷 Recommended by experts, it can help you recover all kinds of lost data in various scenarios even on a computer that won't boot. Users can preview their data on the interface and choose a location for the extracted files. As you don't need any technical knowledge to use Recoverit, just follow these steps:

• After downloading and installing Recoverit on your system, you need to tap into data recovery mode. However, if your Windows 10 system fails to restart, click "Recover from Computer Locked Mode", which will open a new pop-up window. Click the "Start" button to start the process.

• You need to tap bootable drive mode on the next window and then insert a bootable USB drive or bootable CD/DVD drive. Tap the "Create" button to start the process.

• Your system will ask you in the next pop-up window if you want to format your USB device completely. At this point, it is recommended to back up your important data. Click the "Format" button and the process should begin.

• The program creates a boot drive. Note that you cannot remove the USB flash drive. All steps of what to do next will be displayed on the screen. Or you can refer to the data recovery guide.

• Creating a bootable drive can take some time. Once this is done, you must follow the three instructions that will flash on the screen.

• You must configure to boot from the new boot media and change the computer's boot order. After that, you can recover system data.

After this process, restart the system and press the F12 function key. Here you need to enter the BIOS key. Different systems have a unique BIOS entry key; You can find more about iton here.

• Once launched from the boot drive, the Recoverit program should start on its own. After the process, you can recover all your lost data from your unbootable Windows 10 computer.

Once all your data is recovered you can do thisreinstall windows system.

Here we go! After reading this guide, you will surely be able to fix Windows 10/11 and prepare black screen for automatic repair. Here I have listed several methods to fix Windows 10/11 black screen automatic repair issue. If you lost your files in the process, you can also try Recoverit Data Recovery. It is a highly professional and user-friendly data recovery application that allows you to recover all types of files on your Windows system.