A complete guide to setting up EmuMMC/EmuNAND on Nintendo Switch (2023)

If you want to access the eShop and play your cartridge games online with official firmware, you need to configure EmuMMC/EmuNAND on NintendoSwitch. This is because if you go online with a client's firmware, you can get banned. You can get a complete guide on how to configure EmuMMC/EmuNAND atmini hermitage.

About EmuMMC/EmuNAND

That oneemuMMC (or EmuNAND)refers to the copy of the Switch's internal storage stored on the SD card. The copy contains all the content needed to run the Switch, including firmware, data storage, system settings and games installed on the internal storage.

Therefore, you can have multiple separate Switch OS installations. Also, changes to one emuMMC such as B.WLAN settings or installed games do not affect other emuMMCs or sysMMCs.

If you're reading here, maybe most people have a question about "How do I configure EmuMMC/EmuNAND?". Since the whole EmuMMC/EmuNAND setup process is complicated, this post breaks it down into several steps. Follow me to read the article now.

5 steps to configure EmuMMC/EmuNAND

  1. Check your serial number
  2. Prepare a micro SD card/install a new switching system
  3. Enter Homebrew SD settings
  4. Enter recovery mode
  5. Configure EmuMMC/EmuNAND

Phase 1: Check your serial number

The first phase of configuring EmuMMC/EmuNAND is to verify that you have access to configure it. Go to a website namedIs my switch fixed?and enter your serial number and prefix. Then you will know if your console is patched or not.

If it says your switch is unpatched, you can follow this guide and you should be able to get your MU MMC setup correctly. On the other hand, if it says your Nintendo Switch is patched, you won't be able to follow this tutorial. If you have access, enter the next phase.

Phase 2: Preparing a micro SD card / installing a new switching system

Here you have two options. You can prepare a micro SD card or install a new switch system. I will illustrate them one by one.

The Guide to Preparing a Micro SD Card

Now you need to prepare a micro SD card; exFAT or FAT32 is fine. You need to hide two partitions on micro SD card. One partition is dedicated to emuMMC partition with a minimum size of 32 gigabytes, while another partition is dedicated to custom firmware files.

Therefore, it is recommended to choose a micro SD card of at least 64 gigabytes, as a 32 gigabyte card is not really suitable for configuring EmuMMC/EmuNAND operation.

This might interest you:

Now take your micro SD card and connect it to a micro SD adapter and then connect it to your PC. Then you need to download and install a tool called MiniTool Partition Wizard Free Edition on your computer to erase your micro SD card and recreate partitions.

That onedelete all partitionsjclean diskFunctions can help you clean your micro SD card. Then use thecreate partitionFunction of this software to create partitions. Here you can click the button below to download it directly.

free download

After downloading and installing MiniTool Partition Wizard, launch it to get its main interface. Then follow the steps below to complete the process of wiping all partitions on the micro SD card.

delete all partitions

Step 1:Select the entire micro SD card and then select thedelete all partitionsFunction in the left action area. Alternatively, you can right-click on the micro SD card and selectdelete all partitionsno menu pop-up.

A complete guide to setting up EmuMMC/EmuNAND on Nintendo Switch (1)
(Video) Nintendo Switch - Making the emuMMC, backing up your NAND, and getting the keys to the car.

Step 2:cliqueEin the warning window and clickinvestigationto perform the operation. Then the partitions on the micro SD card will be deleted automatically.

A complete guide to setting up EmuMMC/EmuNAND on Nintendo Switch (2)

In addition todelete all partitionscharacteristic, theclean diskThe feature can also help you to clear data on micro SD card.

clean disk

Step 1:After selecting the SD card, click onclean diskon the action panel to continue. Alternatively, you can also right-click on the SD card and select itclean diskoption from the pop-up menu.

A complete guide to setting up EmuMMC/EmuNAND on Nintendo Switch (3)

Step 2:Select a cleaning method from the given options and click onOKto save the changes. then clickinvestigationto execute the pending operation.

Bribery:The longer the process, the greater the security.

A complete guide to setting up EmuMMC/EmuNAND on Nintendo Switch (4)

The best recommendation:6 Effective and Reliable Ways to Delete Files Permanently

Now you can create the two required partitions on the micro SD card.

Create partitions on micro SD card

Step 1:After clicking on the Micro SD card, select itcreate partitionOption on the left action panel.

A complete guide to setting up EmuMMC/EmuNAND on Nintendo Switch (5)

Step 2:You can set the partition label, file system and partition size in the pop-up window. after that clickOKto save the changes. Finally click oninvestigationbutton to perform the operation.

A complete guide to setting up EmuMMC/EmuNAND on Nintendo Switch (6)

You can create a FAT32 or exFAT file system partition. However, to avoid SD card damage and for maximum compatibility, it is recommended to choose the FAT32 file system.

(Video) HOW TO SETUP EMUNAND ON SWITCH 15.0.0 CFW 1.4.0 [2023]

Bribery:Here you need to free up about 32 GB of unallocated space for the second partition which is used to store the emuMMC partition.

For more details on the differences between FAT32 and exFAT, see this post:NTFS vs FAT32 vs exFAT - Difference and Formatting

Stage 3:After clicking on the unallocated space, click on the buttonCryingOption on the left action panel.

A complete guide to setting up EmuMMC/EmuNAND on Nintendo Switch (7)

Step 4:You will get a warning: The newly created partition cannot be used in Windows. Here you can ignore the warning and clickE.

Bribery:If you have Windows 1703 or later, your build of Windows supports multiple partitions on removable media.

A complete guide to setting up EmuMMC/EmuNAND on Nintendo Switch (8)

Step 5:Here you need to set the file system to FAT32 and rename the partition asemmmc🇧🇷 after that clickOKand exit the current window. clickinvestigationon the main page to complete the process.

A complete guide to setting up EmuMMC/EmuNAND on Nintendo Switch (9)

The guide to installing a new switchgear system

If you have not previously used an access format Micro SD card or an internal switch, you may need to update your system and install an update that will allow the Nintendo Switch to accept exFAT SD cards. If it doesn't work, you can also use the FAT 32 partition on the micro SD card.

To do this, you need to turn off the Nintendo Switch and put it in recovery mode. In this mode, you can run the exploit and access Hekate to create a backup and load the first partition. For detailed information about upgrading the switch system, refer toThat isfor your reference.

Phase 3 - Enter the Homebrew SD Setup

then you have to goHome SD setup🇧🇷 Get the latest custom firmware files so you can use them on Cosmos. Here you can see a pre-configured SD card package available.

Step 1:Select the Minimum option. It's enough for the atmosphere customer and the hungry run without extras, so now you can customize it yourself.

Step 2:Scroll down the page to find them.Customize your CFW🇧🇷 In this section you will find theSignatur-Patches(Allow NSP installations). Of course you can also get other system modules. If you just hover your mouse over the options, you can see what they mean and decide if you want to select them.

Stage 3:Scroll down the page toChoose your homemade beerchoose the partto controlas game files and back them up.

Step 4:Surely you can also use some other files here now. Its use is recommended hereHectaresfor loads. In addition, Hekate is also required to create the emuMMC partition. The last two you need are Tegra RCM, so choose your additional technologyRAR my GUI.

(Video) EmuNAND/EmuMMC Setup Guide - Windows | Nintendo Switch [English]

In fact, with this program, you can insert the faculty switch and start the MU-MMC partition process. After selecting all the necessary files, click on theDownload your ZIP filePossibility.

Step 5:After downloading all the necessary files, you can open them. here you can seepayloads,personal computerjDakota del SurFolder Then copy these three files to your desktop.

Step 6:Go to the SD folder and copy all the files in the folder to the micro SD card. Now the Micro SD card is ready and you can eject it from PC.

Bribery:As mentioned above, the unallocated partition won't even appear in Windows unless you have Windows version 1903 or later.

Stage 4 - Enter Recovery Mode

To enter recovery mode, you need to follow the steps below.

Step 1 - Use a paperclip or RCM template

Reconnect the micro SD card to the Nintendo Switch. This is where you'll need a paperclip or an RCM template to work with. The RCM model is highly recommended as it simply shorts pins 1 and 10. If you have these pins connected then hold them downVolumeit's atI canButton. Then you can access the recovery menu.

If you are in the United States, you can purchase the RCM model aton here🇧🇷 If you are in the UK, clickon hereKaufen.

Alternatively, you can bend a paperclip yourself, but this is really annoying as you have to be very precise and it could damage the Nintendo Switch. It is recommended to choose the RCM model, although it is very expensive. You need to write the RCM template on the right side of Orphanage Nintendo Switch.

Step 2 - Use a USB Type-C cable

Press and hold volume up andallowed forpress and wait a moment. Your screen should remain black. Now go to your PC to change the character and then you can run the exploit.

Then you need to take a USB Type-C cable and connect it to your Nintendo Switch to connect it to your PC. The screen should still remain black and your Switch should now be in recovery mode.

Step 3: Use Tegra RCM

1:Go back to your PC and open thepersonal computerArchive. Then click and go to Tegra RCM.

2:Usually, RCM OK is displayed. If not, you need to split the GUI first and click onthe settingsto install the driver.

You can then resolve the payload by clicking on the search icon. Go for fully curved loads and open them up. Then you can take the Heakate and open it. After injecting this payload, your Switch will boot into the hacky recovery menu. You can then disconnect the switch from the PC.

Phase 5: Configure emuMMC/EmuNAND

If you are in Hackett or access emuMMC, you can create an emuMMC partition.

Bribery:It is recommended to create a NAND backup. You can backup your internal storage in Tools to the first partition on the microSD card. You can take that partition or files and put them somewhere safe in case something goes wrong with your official firmware.

You can create an SD partition from the two newly created partitions. However, the first partition is preferred, it seems to be faster. You can proceed as per the necessary prompts.

(Video) Criando uma emunand (emuMMC )

The procedure will copy the entire internal storage to the micro SD card along with the custom firmware files you just placed on the card.

Perform switch on official firmware or client firmware

You can run your switch with official firmware and client firmware. After comparing the two situations, choose the preferred one.

Execute o switch no firmware oficial

You must have the official firmware and the usual structure completely separate. Also, you need to run them on a Nintendo Switch, where you can use the official firmware to connect to the internet and access the eShop and play two-player games online.

If you don't want to run client firmware, make sure to set emuMMC Castle firmware size here.

Also, do not select a custom strength system here, as this in itself will load the client's internal storage, which may result in a ban. So if you don't want that, you need to restore your backup.

Run Turn on the client firmware

You have the official firmware when you turn on a Nintendo Switch normally. You can then play your games online, access the eShop and play your favorite games through internal online services.

Custom firmware can be used for homebrew applications. So the emuMMC partition creation process depends on the speed of your micro SD card. The whole process can take between 10 and 30 minutes, so be patient. If you use 11 batteries like a Nintendo Switch and leave it alone for a while.

When the process is complete, close this menu. If you access the emuMMC partition and find that it is disabled, you can change its status. If you see the emuMMC NFC settings saved on the SD card, it should say that the MU MMC is activated as raw partition. This is an ideal result for you.

Then close the page. You can boot standard and haggerty system or custom firmware.

If you want to access client firmware on your microSD card, select emuMMC client firmware. If you wanted to fully run the nest of stores like the store here, or the internal floppies mounted completely and normally, you would have done so before the hack.

In that case, you can leave the client firmware file in the emuMMC partition like this second option here. There's the cosmos splash screen, which is pretty short.

If you see this dark atmosphere logo, which means you are loading the emuMMC partition, here you can move the correct Joy-Con. Then wait for the client firmware to start.

As with the operation performed on the official firmware, do not connect to the Internet, as this may cause you to be blocked.

Does the question "How to configure EmuMMC/EmuNANDonHekate" bother you? Here is a complete guide on how to create one.click to tweet


This is the entire process of configuring EmuMMC/EmuNANDonNintendoSwitch. If you are looking for answers on how to configure EmuMMC/EmuNANDonAtmosphereCFW, please read the text carefully.

All the necessary steps and tools are explained in the post. You can buy them by clicking on the provided button or from the shopping site. If you have any questions or concerns about the EmuMMC/EmuNAND or MiniTool software creation process, please leave your words in the comments section or send an email to[email protected].


Should I create an EmuMMC for Switch? ›

If you want to be able to access the eShop and play your cartridge games online with the official Firmware set up, you have to set up EmuMMC/EmuNAND on Nintendo Switch. That is because that if you go online in a customer firmware you may get banned. You will get a full guide to set up EmuMMC/EmuNAND from MiniTool.

What is the difference between EmuNAND and sysNAND on Nintendo Switch? ›

sysNAND stands for System NAND, meaning the internal storage in your actual Switch. emuNAND stands for emulated NAND, this means that your entire NAND (system memory) will run off your microSD card with Custom Firmware (CFW). This NAND's contents (games, applications, saves, etc.)

Why can't my Switch access my microSD card? ›

If the microSD card is not compatible with the console, replacing it with a compatible type may resolve the problem. If the microSD card label indicates it is SDXC, reinsert the microSD card back into the console. Then power on Nintendo Switch and be sure to perform a system update.

How to install a microSD card Switch? ›

Power off the Nintendo Switch console, then gently swing the stand open to show the microSD card slot. Ensure the microSD card is properly positioned with the label facing away from the console. Insert the microSD card into the slot and gently push down until it clicks into place.

Is it a good idea to mod your Switch? ›

Modding A Switch Is Complex & Risky, Alternative Hardware Is Made For Emulation. Given the drawbacks, and the complexity of the modding process, there is little to gain from modding a Switch, as opposed to finding an alternative device to achieve similar ends.

How much RAM do I need for Switch emulation? ›

As a result, emulation should in general not exceed Switch's 4GB of dedicated RAM, with the exception of games that eat memory for other purposes (for example, GPU, audio, and OS emulation may still push the emulator beyond this).

Can you get banned using emuNAND? ›

For the most part, emuNAND is used to do things that could get you banned, but to always keep it OFFLINE, then only go online with sysNAND. So since all of the bannable actions were done on the emuNAND, keeping it forever offline let's you get away with being banned.

Can you play online on emuMMC? ›

(Also please note that firmwares 8.0. 0+ will never work with deja-vu) You can use an updated emuMMC dedicated to online/clean play, while your sysNAND is used offline for custom firmware.

What does CFW stand for Switch? ›

In the video game console community, the term is often written as custom firmware or simply CFW, referring to an altered version of the original system software (also known as the official firmware or simply OFW) inside a video game console such as the PlayStation Portable, PlayStation 3, PlayStation Vita/PlayStation ...

Do you need to format a microSD card for Switch? ›

Ideally, it is not needed to format your SD card before using it on Nintendo Switch. Though, if you have been using the SD card before or it has another file system that is not supported by Switch, then you should format it.

Can you download straight to SD card on Switch? ›

Transferring game data

On the HOME Menu, select "System Settings" → "Data Management" → "Move Data Between System/microSD Card". *If no microSD card is inserted, this option won't be selectable. To transfer data from the system memory to the microSD card, select "Move to microSD Card".

Why is my device not reading my SD card? ›

To fix the problem of my SD card won't read on my phone, reboot your Android. Remove the memory card as well as the battery. Carefully replace both of these on the phone. Check to see if your phone can identify the SD card by turning it on.

Can I put a 1TB SD card in my Switch? ›

The Nintendo Switch can accommodate such cards up to 2TB in size! It sounds amazing but it turns out that regular microSD cards don't go up to 2TB. It might be available in the future but the best you can do right now is a 1TB card.

What is the maximum size SD card for Nintendo Switch? ›

The following types of microSD card are supported on Nintendo Switch: microSD (up to 2 GB) microSDHC (4 GB - 32 GB) microSDXC (64 GB and above)

Do all microSD cards work with Nintendo Switch? ›

The following types of microSD cards are supported on Nintendo Switch: microSD (up to 2 GB) microSDHC (4 GB - 32 GB) microSDXC (64 GB and above)

What should you not do with a Nintendo Switch? ›

Do not drop, hit, or otherwise abuse the Nintendo Switch console, components, game card or accessories. Doing so may damage the screen or other precision components of the Nintendo Switch console. Make sure all connections to the Nintendo Switch system are made carefully and inserted into the correct locations only.

Is it worth jailbreaking Nintendo Switch? ›

Jailbreaking your Nintendo Switch isn't for the light-hearted, but it does let you do a lot more with your Switch, from installing loads of additional games (including plenty of retro titles) to running unofficial apps that add new functionality.

What are the risks of modding a Switch? ›

Disclaimer: Modifying your Nintendo Switch violates the Terms of Service laid out by Nintendo, and could result in an account ban, a console ban, or, in some cases, legal action. We do not actively encourage the usage of modding or custom firmware, and advise anyone who does, to do so at their own risk.

Is emulating Switch games illegal? ›

People making Nintendo emulators and Nintendo ROMs are helping publishers by making old games available that are no longer being sold by the copyright owner. This does not hurt anyone and allows gamers to play old favourites. What's the problem? The problem is that it's illegal.

Is 256GB overkill for Switch? ›

We highly recommend getting a 256GB card. It has the space to hold plenty of saved data, screenshots, and videos. Of course, if you have all the games in the world and want to play any of them at a moment's notice, you'll want to look at something much larger, like a 512GB card for maximum storage.

What processor do I need for emulation? ›

The AMD Ryzen 5 2600 processor

The capable Ryzen 5 3600X process is perfect for emulation applications. It has fantastic multi-core performance and very good single-core performance. When choosing a processor for emulated games, your focus should be on the single-core performance of your PC.

Can you install mods on Switch? ›

Get mods for games in places you'd never expect. Mod.io is offering mod support to platforms that you don't normally associate with having mods, now including the Nintendo Switch.

Will homebrew ban my Switch? ›

This involves using something called custom firmware via the Homebrew App. Be warned. This falls under hacking within Nintendo's terms of Service, and may result in a ban. Being banned by Nintendo means that you'll no longer be able to access the official servers and this may affect a lot of online games.

How do I bypass a server ban? ›

Here are four ways to help you easily bypass some of the internet's most common IP bans:
  1. #1: Switch out your Media Access Control (MAC) address.
  2. #2: Change your IP address using a VPN.
  3. #3: Clear your computer's cache & 'digital residue'
  4. #4: Uninstall the program or browser.

How do I boot into custom firmware Switch? ›

  1. Power on your Switch into RCM, and inject the Hekate payload.
  2. Navigate to Launch using the touch screen.
  3. Find Atmosphere FSS0 EmuMMC and launch it.

How do I play NES online with Switch? ›

To play NES, SNES, or N64 games on your Nintendo Switch, follow these steps: From your Nintendo Switch's Home screen, navigate to the bottom-left tab, and select Nintendo Switch Online. Once the Home screen for Nintendo Switch Online appears, scroll down and select NES, Super NES & Nintendo 64.

How long does EmuMMC take? ›

Expect it to take between 10 minutes to an hour (or more, if your SD card is very slow).

What does Jailbreak mean on Switch? ›

Jailbreaking is the process of exploiting the flaws of a locked-down electronic device to install software other than what the manufacturer has made available for that device. Jailbreaking allows the device owner to gain full access to the root of the operating system and access all the features.

What firmware on Switch can be hacked? ›

All firmware versions of unpatched Switch consoles can be modded using the Recovery Mode or RCM method. In addition, consoles with firmware version 1.0.0 can be modded using Nereba, and versions 2.0.0 to 4.1.0 are patchable with another software called Caffeine.

What Switch model is hackable? ›

Switch OLED confirmed to be hackable on Day 1, but tread carefully. Multiple hacker sources have confirmed that the new Switch OLED can be hacked, using the same modchips that can be used on patched and/or V2 Nintendo Switch models.

Should Switch SD card be FAT32 or exFAT? ›

2. Should I use exFAT or FAT32 for switch? It would be best to consider using FAT32 because it's compatible and less strenuous. This is unlike the exFAT file system, which demands that you first upgrade your Switch and download supported drivers before using it.

Do you really need to format a new SD card? ›

The devices memory cards are installed on may use a variety of operating systems, such as Windows, Linux and so on. Sometimes unpredictable issues may occur during data read/write. To avoid such issues, we strongly suggest you format the memory card before using it for the first time on any new device.

What happens if you don t format an SD card Nintendo Switch? ›

You are required to format a micro SD card before using it with a Nintendo Switch. All data on stored on the micro SD before formatting will be lost and cannot be recovered.

How do I prepare my SD card for Switch? ›

Complete These Steps:
  1. From the HOME Menu, select “System Settings”.
  2. Scroll down the options on the left and select “System”.
  3. Scroll down the options on the right-hand side and select “Formatting Options”. ...
  4. Select “Format microSD Card”, then “Continue”. ...
  5. To continue, select “Continue”.

Can you transfer physical Switch games to SD card? ›

Nope, you cannot download a game off of a cartridge onto the system memory. The thing is, with physical cartridges, the game and license are stored on the cartridge itself, while with digital purchases the license is tied to your user account and stored locally on your console.

What is stored on SD card Switch? ›

Yes, a microSD card can be used to save screenshots and software data, including downloaded software, software updates, and DLC. Learn more about using microSD cards on Nintendo Switch.

Can a undetected SD card be fixed? ›

In such cases, you need to reformat the SD card on your computer. But before you do that, consider using a data recovery application like Disk Drill to recover all important files that may still be present on the SD card.

How do I fix an unresponsive SD card? ›

Windows: Settings > Phone storage > Remove SD card

Remove the SD card from the phone and re-insert it. Open the SD card on another device, or on a PC using a card reader. Format the SD card as FAT32 using a computer and re-insert it into your phone. NOTE: Be aware that formatting the SD card will erase all data on it.

How do I fix an unrecognized SD card? ›

When your laptop or computer doesn't recognize the SD card, you may try workarounds: Change the SD card reader and reconnect it to your PC. Change the SD card drive letter. Update the SD card driver.

Is 128GB enough for Switch? ›

Its most certainly enough for a person that plays casually or just uses the switch as a side console. However if it is going to be your main console and you want to download a lot of games you may need more space.

How many Switch games can 128GB hold? ›

We'd recommend a 128GB SD card for most users; this will give you enough room for about 15-18 Nintendo Switch games on your console, but it's worth noting that smaller indie titles will take up far less space.

How many Switch games can 512GB hold? ›

How many games can a 512GB SSD hold Nintendo Switch? There is a limit based on storage space. Your switch can hold a lot of games, but only around 30.

Does microSD card speed matter for Switch? ›

A lot. For example, the Nintendo Switch has limited storage, and getting an SD card can let you install more and bigger games. Any SD card will help, but the faster the card, the quicker those games on it will load. If you're getting sick of staring at loading screens, a faster SD card might be just what you need.

Is there a difference between a Nintendo Switch SD card and a regular SD card? ›

The difference between these memory cards is in their storage capacity. A micro SDHC usually has up to 32GB storage, while a micro SDXC offers up to 2TB storage. Do you want to save more than 3 games on the SD card? Choose a micro SDXC.

Can you use a 512GB SD card on Nintendo Switch? ›

The officially-licensed SanDisk microSDXC card for the Nintendo Switch provides dependable, high-performance storage for your console. Add up to 512GB1 of capacity, so you can keep your favorite titles on a single card.

Is 64GB enough for Switch? ›

You may get away with downloading a handful of games directly to your console, but the onboard 32GB storage can fill up fairly quickly. Even the boosted 64GB inside the Switch OLED isn't enough for most users.

How to get more storage on Nintendo Switch without SD card? ›

You can free up space in the System Memory using Manage Save Data/Screenshots. Software data (including downloaded software, software updates, and screenshots) can be stored on the System Memory or on a microSD card. Learn more about data management on Nintendo Switch.

What is the largest SD card? ›

SDXC (Secure Digital Extra Capacity) Memory Cards provide higher capacity and faster processing speeds compared to standard SD cards. MyMemory's stock ranges from 64GB to an enormous capacity of 512GB, with 1TB and 2TB on the horizon.

Is it OK to install Homebrew on Switch? ›

Homebrew can be run for free on your Switch through Custom Firmware as long as you have a "first-generation" system, and a USB-C cable.

What is the best way to record Switch gameplay? ›

Complete These Steps: To capture video gameplay footage: While in a compatible game, press and hold down the Capture Button on the left Joy-Con. Up to thirty seconds of gameplay prior to pressing the Capture Button will be saved.

Is Homebrew Switch risky? ›

Running any kind of unofficial software on your Nintendo Switch runs the risk of Nintendo banning your console or account from online services.

What happens if you get perma banned? ›

When you are permabanned from League of Legends, you are no longer allowed to play League of Legends using this account. At this point, you have: Been given your chat logs that resulted in the ban. Been banned previously for poor behavior.

Is it risky to mod Switch? ›

Disclaimer: Modifying your Nintendo Switch violates the Terms of Service laid out by Nintendo, and could result in an account ban, a console ban, or, in some cases, legal action. We do not actively encourage the usage of modding or custom firmware, and advise anyone who does, to do so at their own risk.

What can a jailbroken Switch do? ›

What Can A Hacked Switch Do?
  • Running Homebrew Applications.
  • Running Emulators.
  • Running Backup Copies of Switch Games.
  • Installing Custom Themes.
  • Run Android.
  • Installing Cheats.
Nov 2, 2022

Can you record Switch gameplay without a capture card? ›

Unless your TV has built in recording software or an output port, then you can't record Switch gameplay from your TV. The most economic way of recording Switch gameplay would be a capture card hooked up to your computer.

What is the easiest way to record gameplay? ›

Best Game Recording Software on Windows (2023)
  1. Open Broadcaster Software.
  2. Streamlabs OBS.
  3. Nvidia GeForce Experience.
  4. Radeon ReLive.
  5. Bandicam.
  6. Gamecaster.
  7. Fraps.
  8. Movavi Screen Recorder.
Jan 27, 2023

Can Nintendo switches get viruses? ›

Although it is possible for your console to get a virus, this is not something you need to worry about. It takes a lot of time and effort for a hacker to program an effective virus. Consequently, it makes more sense to target other devices besides gaming consoles.

Can a hacked Switch be hacked? ›

Not all Nintendo Switch consoles can be modded.

The mod, or hack, depends on a specific vulnerability to a piece of software called Fusée Gelée. When the vulnerability got discovered, someone disclosed it to Nintendo, who fixed it for later console releases. If you own an unpatched device, it can be modded.

How does Nintendo ban switches? ›

Super bans involve Nintendo completely stopping a console from accessing its CDN (Content Distribution Network). When a Switch console is hit with this, it stops the system from being able to natively access Nintendo's servers for re-downloads of archived software and firmware updates.


1. Switch Guide Emummc Set-Up For Micro Sd
2. Whats an Emunand/ Emummc and Should you use one?
(Jonny Troche)
4. [Switch][Linux] Setting up Android & EmuMMC together
(Zexceil Xaros)
5. Update EmuMMC with Daybreak - Nintendo Switch 2021 Full Guide
Top Articles
Latest Posts
Article information

Author: Rev. Porsche Oberbrunner

Last Updated: 07/29/2023

Views: 5530

Rating: 4.2 / 5 (73 voted)

Reviews: 80% of readers found this page helpful

Author information

Name: Rev. Porsche Oberbrunner

Birthday: 1994-06-25

Address: Suite 153 582 Lubowitz Walks, Port Alfredoborough, IN 72879-2838

Phone: +128413562823324

Job: IT Strategist

Hobby: Video gaming, Basketball, Web surfing, Book restoration, Jogging, Shooting, Fishing

Introduction: My name is Rev. Porsche Oberbrunner, I am a zany, graceful, talented, witty, determined, shiny, enchanting person who loves writing and wants to share my knowledge and understanding with you.