Accessing the HP Start Menu Using the HP Start Menu Button [Full Guide] (2023)

All computer users know how to start their computer, but few know about the Start menu and how to access it on their computer. Here we take the HP start menu andHP start menu buttonas an example to show you everything you need to know about it.

Find a Quick Start Guide that explains how to access and use the HP Start menuHP start menu button? Stay here. On this page we will show you how to access and use the Start menu on your HP laptop or desktop computer to properly configure your computer. Applies to all HP PC or laptop users. Let's begin.

What is the HP Windows 10 Start Menu?

Normally, when you press the power button to start a computer, the boot menu does not appear. The boot menu is a focus that appears before entering the operating system by pressing the boot menu keys.

Why is the boot menu important? Here's what you can do with the boot menu:

• Change the BIOS boot order
• diagnostic system
• Boot the computer from a USB or recovery drive
• Repair or fix internal system errors, etc.

Windows 10 hp start menu button

To log in and access the HP Start menu and make changes to their computer, HP users must press the HP Start menu keys.

So what is the HP Start Menu button? We will see:

How to access the HP Start Menu

So how do I get to the start menu on my HP laptop? Or how to go to the start menu on an HP laptop to change its boot order?

Here are the basic steps you can follow to get into the Start menu on your HP computers:

Step 1.Turn on or restart your HP computer.

Step 2.Immediately press "Esc" or "F9" to bring up the boot menu.

Step 3.Wait for the HP boot menu to appear.

Entries in the HP Start menu

So what's in the HP Start menu? If you followed the step-by-step guide above, you will see the following content in the HP Start Menu (aka HP Start Menu):

Menu Iniciar do Notebook HP:

• F1-The system information
• F2 Systemdiagnose
• F9 boot device options
• BIOS-Setup F10
• F11 System Restore

Menu initiar for desktop HP:

• F1-The system information
• F2 Systemdiagnose
• F9 boot device options
• BIOS-Setup F10
• F11 System Restore
• F12 network boot

What does each option mean and how do you use those Start menu buttons? You will find the answers in the next part.

When and how to use the HP Start menu

This part tells you when to use each option on the HP Start menu and how to use each Start menu button.

F1-The system information

System information key can help you to load basic system details, product details like manufacturer, processor, serial number and BIOS data etc.

How to use:

If you need to check your computer and system information, do the following:

Step 1.Restart your PC and press "Esc" to bring up the boot menu.

Step 2.Press "F1" and wait for the computer to load the system information.

F2 Systemdiagnose

The system diagnostics key is used to check and test hardware errors on HP computers.

How to use:

Step 1.Restart the PC and press "Esc" and enter the boot menu.

Step 2.Press F2 and wait for the computer to verify and load diagnostic information.

Step 3.To perform more tests, you can use the up and down arrow keys to scroll through and select items.

For example unit tests.

F9 boot device options

Boot Device Options, F9 is known for UEFI BIOS boot functions, including Windows Boot Manager, network card. And it also includes legacy boot sources like DVD, hard drive, CD and USB flash drive.

If you need to change or change the PC boot order in BIOS, you can use this option.

How to use:

#1. Changing the HP BIOS boot order

Step 1.Restart the PC and press "Esc" and enter the boot menu.

Step 2.Press F9 to enter BIOS boot options.

Step 3.Use the arrow keys to customize or change the boot drive on your HP laptop.

step 4Save the changes and restart the HP computer.

#two. Boot HP from USB

Step 1.connect aWindows recovery USB driveto your PC.

Step 2.Restart the PC and press "Esc" and enter the boot menu.

Step 3.Press F9 to enter BIOS boot options.

step 4Use the arrow key to change the computer's boot drive to the USB drive.

step 5Save the changes and restart your computer.

BIOS-Setup F10

F10, the BIOS setup option, is a shortcut to change the UEFI boot mode to Legacy BIOS mode.

F11 System Restore

It is an option that you can use to reset your HP computers, for example factory reset your computer.

How to use:

#1. HP factory reset on boot:

If it is youWindows cannot be reset to factory settingsIn the settings you can test it with the start button.

Please note that this process will completely erase all files on your drive. So before you start, make sure you have a full backup of your computer data.

Step 1.Remove or disconnect any unnecessary external devices and restart the HP computer.

Step 2.Press the Esc key to bring up the boot menu.

Step 3.Press F11 and select Troubleshoot to bring up Recovery Manager.

step 4Select "Factory Reset" and follow the on-screen instructions to complete the process.

You might like:How to recover files after factory reset laptop?

#two. Run System Restore on HP

If you are not satisfied with the current operating system or want to roll back your Windows operating system to a previous system state using the created system image, try this.

Please note that this process may also lead to loss of some files in system C drive. So, make sure to backup all important files on system C drive.

Step 1.Remove or disconnect any unnecessary external devices and restart the HP computer.

Step 2.Press the Esc key to bring up the boot menu.

Step 3.Press F11, click Troubleshoot to enter Recovery Manager.

step 4Select "System Restore" and continue to select a previous system image.

step 5Follow the on-screen instructions to complete the process.

If you're sorry, take a look at:How to undo system restore.

In short, stop using your computer immediately after losing files by using the HP Start Menu button in Windows 10 to recover or reset the operating system. and become reliableEaseUS Datenwiederherstellungsassistentfor help

You can also use EaseUS manual repair and repair services to perform system repair and restore. Professional technical staff can help you solve system boot errors including system crash, system blue screen, system black screen, etc.

F12 network boot

If you have a network drive that you can use to access and start your computer, try this option. Booting an HP computer from a network drive is fast and efficient.

How to use:

Step 1.Restart the HP computer.

Step 2.Press the Esc key to bring up the boot menu.

Step 3.Press F12 to bring up the network boot menu.

step 4Select a network drive to start your computer.

step 5Save the changes and restart your PC.

Data recovery from the HP Start menu

Sometimes when your HP computer's operating system crashes or fails to boot, you may need help with data recovery from the HP boot menu.

When your computer won't boot or dead, you can turn to boot data recovery software for help. Here,EaseUS data recovery wizard with bootable devicesCan help. You can use it to create bootable media and start your HP from your boot menu to scan and recover all valuable files on your hard drive.

You can use this powerful data recovery softwarerecover data from dead hp laptop hard drive.

Step 1. Create a boot disk

Prepare an empty USB. If you have important data, copy it to another device. Creating a bootable disc will erase the data on the USB. EaseUS Data Recovery Wizard WinPE Edition will help you create a bootable disk.

Connect the USB drive to the PC and launch EaseUS Data Recovery Wizard WinPE Edition. Select the USB drive and click "Create" to create a bootable disk.

Step 2. Boot from bootable USB

Connect the boot disk to the PC that won't boot and change your computer's boot order in BIOS. Rebooting your computer and pressing F2 at the same time to enter BIOS works well for most users.

Specify that the PC should be started from "Removable Devices" (bootable USB data medium) or "CD-ROM drive" (bootable CD/DVD) in addition to the hard disk. Press "F10" to save and exit.

Step 3. Recover data from hard drive that won't boot

When booting from USB, you can run EaseUS Data Recovery Wizard from a bootable WinPE disk. Choose the drive you want to scan to find all your lost files.

Click "Scan" to start scanning.

Recover data from computer or laptop. After the scanning is completed, you can preview all recoverable files, select target files and click "Recover" button to get your files back. It is better to save all recovered data elsewhere to avoid data overwriting.

Conclusion: The HP Start menu is complex, use it with caution

On this page we will introduce what the HP Start Menu is and how to access it efficiently. Based on the HP boot menu buttons, you can check device information, run hardware diagnostics, change the boot order, run HP from USB, and even run HP from a network drive.

Remember that the HP Start menu is complex and use it with caution. Even if you cannot access files on unbootable HP computer, EaseUS Bootable Data Recovery Software can help.